INZOC
The IFM-5 series oil wear multi-function sensor adopt the latest scientific research achievements, featuring new circuit design and advanced algorithm models. The sensor fully considers oil viscosity during online monitoring and continuously records and evaluates equipment wear conditions by monitoring mechanical wear particles in oil. The probe can identify micro-particles and micron-level magnetic debris. It supports monitoring of: Wear alarm；signals；Wear severity；Water content；Saturation level；Oil quality. When wear particles pass through the sensor, alarm signals are triggered, enabling early fault detection and providing effective data support for predictive maintenance.
Product feature
Technical Specification
Parameter | Measurement Range | Accuracy | Resolution |
Wear Alarm | ≥ 30 μm particle detection | – | Open-drain signal |
Wear Severity | ≥ 0 | ≥ 0 | 0.001 |
Temperature | −35 to 85 °C | – | 0.1 °C |
Water Content | 0.03–100 % | ±0.3 | 0.01% |
Trace Water | 1–10,000 ppm (model conversion) | ±10 % or 50 ppm | 1 ppm |
Temperature | −35 to 85 °C | ±0.5 °C or ±3 % | 0.1 °C |
Saturation | 0.03–1 aw | ±0.03 aw | 0.001 aw |
Detectable metal types:Steel, aluminum, stainless steel, bronze, tin and other conductive metals. | |||
Electrical Parameter
Electrical Specifications | |
Power Supply | DC 12–24 V |
Current | ≤ 20 mA |
Power Consumption | 0.5 W |
Signal Output | 6-pin M8 aviation connector (standard 1.5 m cable) |
Wiring Definition | 1 pin: switch output (wear alarm)2 pins: RS485 (physicochemical parameters)2 pins: power supply |
Wear Signal Output | Open-drain signal |
Physicochemical Signal | Modbus / CAN standard frame |
Hardware Interface | |
Oil Port Thread | G1/2 (standard type) |
Hardware Performance | |
Pressure Rating | 0–5 MPa |
Operating Temperature | −20 to 100 °C |
Protection Rating | IP67 |
Housing Material | 316L stainless steel |
Related Product
IFM-4 Adsorption Oil Wear Particle Sensor
Adsorption-type particle detection design, captures tiny metal debris in lubricating oil. IP67 316L stainless steel housing, supports wear alarm open-drain signal output. Perfect matching for wind power, marine and metallurgical equipment predictive maintenance.
IFM-3 Oil Metal Wear Particle Sensor
Specialized in ferromagnetic wear particle monitoring with millisecond-level response speed. G1/2 standard oil thread, withstands 0-5MPa working pressure. Compatible with turbine oil, gear oil and hydraulic oil for shield tunneling & power plants.
IFV-7 Multi-Parameter Oil Condition Sensor
Works collaboratively with IFM-5 for full oil health monitoring, tests viscosity, density, saturation and moisture content in one unit. Modbus/CAN communication, ultra-wide viscosity range, widely used across all industrial lubrication systems.
